Federal Pacific Panel Replacement · Orlando, FL
Federal Pacific Panel Replacement in Orlando, FL
Federal Pacific Electric (FPE) panels with Stab-Lok breakers have a long history of breakers that may fail to trip during an overload or short circuit. Electricians commonly recommend replacing them, and many insurers ask about them.
- Call now to check electrician availability in your area
- Independent, licensed electricians
- Serving College Park, Thornton Park, Baldwin Park and more
Why federal pacific panel replacement comes up in Orlando
Orlando's mid-century neighborhoods such as Colonialtown, Delaney Park and the subdivisions around Pine Hills and Azalea Park were built when Federal Pacific panels were common, and many of those panels are still in use. Florida insurers often require replacement after a four-point inspection. Electricians replace the whole panel rather than individual Stab-Lok breakers, often adding capacity for a pool, a larger AC system or an EV charger.
Inside the city, OUC, the city-owned utility, schedules the meter pull; Duke Energy serves much of the surrounding metro. Permits come from the City of Orlando's permitting services or Orange County.
- Permits in Orlando
- Inside city limits, electrical permits come from the City of Orlando's Permitting Services; unincorporated areas are permitted by Orange County, and Winter Park and other cities run their own.
- Electric utility
- OUC in the city (city-owned); Duke Energy in much of the metro
Signs to look for
- "Federal Pacific", "FPE" or "Stab-Lok" on the panel label
- Breakers that feel loose or do not snap firmly into place
- A home inspector or insurer flagging the panel
- Warm breakers or a warm panel cover
- Plans to add major loads to an older home
How the work is done
1. Confirm the panel type
The electrician identifies the panel and checks the service, meter base and grounding.
2. Permit and utility disconnect
The permit is pulled and the utility shuts off power for the swap.
3. Replace panel and breakers
All circuits move to a new panel with listed breakers and required AFCI and GFCI protection.
4. Inspection and reconnect
The work is inspected and power is restored.
What moves the price in Orlando
Electricians set their own prices. Block homes from the 1950s through the 1970s may have original panels and few outlets per room.
- Panel size and number of circuits
- Whether the service amperage increases
- Meter base or service entrance replacement
- Panel relocation
- Grounding and bonding corrections
- Permit and utility fees
Federal Pacific Panel Replacement in Orlando: questions
Do I need a permit for federal pacific panel replacement in Orlando?
Usually, yes. Inside city limits, electrical permits come from the City of Orlando's Permitting Services; unincorporated areas are permitted by Orange County, and Winter Park and other cities run their own. The electrician normally pulls the permit and schedules the inspection.
Is the utility involved in Orlando?
If the work affects the meter or service, the electrician coordinates with OUC in the city (city-owned); Duke Energy in much of the metro, which owns the meter and service drop.
How do I know if I have a Federal Pacific panel?
Look for "Federal Pacific Electric", "FPE" or "Stab-Lok" on the panel door or label, and thin breakers with red-orange tips.
Can I just replace the Stab-Lok breakers?
Electricians generally recommend replacing the whole panel, because the concerns involve how the breakers and panel work together, not only individual breakers.
Will my insurance cover an FPE panel?
Some insurers decline or surcharge homes with FPE panels. Ask your insurer directly; a permit and final inspection usually document the replacement.
Is a Federal Pacific panel an emergency?
Not by itself, but signs like heat, burning smells or breakers that do not reset are reasons to call promptly.
Related help in Orlando
Federal Pacific Panel Replacement in other cities
Need federal pacific panel replacement in Orlando?
Call now and we connect you with a licensed electrician who serves your ZIP code.