Skip to content

Nationwide · Licensed electricians in 48 states + DC

Brightlane Electric

Federal Pacific Panel Replacement · Overland Park, KS

Federal Pacific Panel Replacement in Overland Park, KS

Federal Pacific Electric (FPE) panels with Stab-Lok breakers have a long history of breakers that may fail to trip during an overload or short circuit. Electricians commonly recommend replacing them, and many insurers ask about them.

  • Call now to check electrician availability in your area
  • Independent, licensed electricians
  • Serving Downtown Overland Park, Nall Hills, Brookridge and more

Why federal pacific panel replacement comes up in Overland Park

North Overland Park's 1950s and 1960s ranch homes in neighborhoods such as Nall Hills, Brookridge and Oak Park were built when Federal Pacific panels were common, and many still have them. Inspectors in Johnson County's busy market flag them routinely. Electricians replace the whole panel, often moving to 200 amps for a basement finish, a heat pump or an EV charger.

Kansas has no statewide license, so check that your electrician holds the Johnson County license the city uses. Evergy schedules the meter pull. Permits come from the City of Overland Park's building safety division.

Permits in Overland Park
Electrical permits come from the City of Overland Park's building safety division. Kansas has no statewide electrician license, and Johnson County runs its own contractor licensing program that many cities in the county use.
Electric utility
Evergy

Signs to look for

  • "Federal Pacific", "FPE" or "Stab-Lok" on the panel label
  • Breakers that feel loose or do not snap firmly into place
  • A home inspector or insurer flagging the panel
  • Warm breakers or a warm panel cover
  • Plans to add major loads to an older home

How the work is done

  1. 1. Confirm the panel type

    The electrician identifies the panel and checks the service, meter base and grounding.

  2. 2. Permit and utility disconnect

    The permit is pulled and the utility shuts off power for the swap.

  3. 3. Replace panel and breakers

    All circuits move to a new panel with listed breakers and required AFCI and GFCI protection.

  4. 4. Inspection and reconnect

    The work is inspected and power is restored.

What moves the price in Overland Park

Electricians set their own prices. Mid-century ranch homes often have 100 amp panels that are already full, and some have panel brands electricians commonly recommend replacing.

  • Panel size and number of circuits
  • Whether the service amperage increases
  • Meter base or service entrance replacement
  • Panel relocation
  • Grounding and bonding corrections
  • Permit and utility fees

Federal Pacific Panel Replacement in Overland Park: questions

Do I need a permit for federal pacific panel replacement in Overland Park?

Usually, yes. Electrical permits come from the City of Overland Park's building safety division. Kansas has no statewide electrician license, and Johnson County runs its own contractor licensing program that many cities in the county use. The electrician normally pulls the permit and schedules the inspection.

Is the utility involved in Overland Park?

If the work affects the meter or service, the electrician coordinates with Evergy, which owns the meter and service drop.

How do I know if I have a Federal Pacific panel?

Look for "Federal Pacific Electric", "FPE" or "Stab-Lok" on the panel door or label, and thin breakers with red-orange tips.

Can I just replace the Stab-Lok breakers?

Electricians generally recommend replacing the whole panel, because the concerns involve how the breakers and panel work together, not only individual breakers.

Will my insurance cover an FPE panel?

Some insurers decline or surcharge homes with FPE panels. Ask your insurer directly; a permit and final inspection usually document the replacement.

Is a Federal Pacific panel an emergency?

Not by itself, but signs like heat, burning smells or breakers that do not reset are reasons to call promptly.

Related help in Overland Park

Federal Pacific Panel Replacement in other cities

Need federal pacific panel replacement in Overland Park?

Call now and we connect you with a licensed electrician who serves your ZIP code.

Call now