Standby Generator Installation · Oklahoma City, OK
Standby Generator Installation in Oklahoma City, OK
A standby generator is a permanently installed unit, usually fueled by natural gas or propane, that starts on its own when the power goes out and switches your home over through an automatic transfer switch.
- Call now to check electrician availability in your area
- Independent, licensed electricians
- Serving Heritage Hills, Mesta Park, Plaza District and more
Why standby generator installation comes up in Oklahoma City
Tornadoes, ice storms and summer windstorms all cause outages in Oklahoma City, and the October 2020 ice storm left hundreds of thousands of OG&E customers in the metro without power for days. Many families now choose natural-gas standby generators with automatic transfer switches, and Oklahoma Natural Gas may need to upgrade the meter for a whole-house unit. Units must sit outdoors on a level pad with clearance from windows, doors and property lines.
Permits come from the city's Development Services Department, with separate gas permits. Ask whether it should run central air.
- A standby generator with an automatic transfer switch, usually fueled by natural gas, starts on its own.
- Permits in Oklahoma City
- Electrical permits in Oklahoma City come from the city's Development Services Department; Edmond, Norman and Moore run their own. Oklahoma licenses electricians through the Construction Industries Board.
- Electric utility
- OG&E
Signs to look for
- Outages that last a day or more in your area
- Medical equipment, sump pumps or home offices that cannot lose power
- No one home to set up a portable generator during storms
- Wanting central air or heat to run during outages
- Natural gas already at the home
How the work is done
1. Load and site review
The electrician decides which circuits to back up, sizes the unit, and picks a compliant spot outdoors.
2. Permits and fuel
Electrical and, often, gas or propane permits are pulled, and the fuel supply is checked for capacity.
3. Install unit and transfer switch
The pad, generator, automatic transfer switch and wiring are installed; a gas fitter connects the fuel.
4. Inspection and startup
The work is inspected, the unit is started, and the transfer is tested.
What moves the price in Oklahoma City
Electricians set their own prices. Older homes may have original or patched wiring and small services, while mid-century ranches often have full panels.
- Generator size in kilowatts
- Whole-house versus essential-circuit transfer switch
- Distance from the panel and gas meter
- Gas meter or propane tank upgrades
- Pad, placement and HOA or flood-elevation requirements
- Permits and gas work
Standby Generator Installation in Oklahoma City: questions
Do I need a permit for standby generator installation in Oklahoma City?
Usually, yes. Electrical permits in Oklahoma City come from the city's Development Services Department; Edmond, Norman and Moore run their own. Oklahoma licenses electricians through the Construction Industries Board. The electrician normally pulls the permit and schedules the inspection.
Is the utility involved in Oklahoma City?
If the work affects the meter or service, the electrician coordinates with OG&E, which owns the meter and service drop.
What size standby generator do I need?
It depends on what you want to run. Essential circuits may need a smaller unit; whole-house backup with central air needs more. A load calculation decides.
Standby or portable generator?
A portable generator with an inlet and interlock costs less but has to be set up and refueled by hand. A standby unit starts and switches over by itself.
Can a standby generator run on propane?
Yes. Most run on natural gas or propane; the fuel supply must be sized for the unit.
How close to the house can it go?
Manufacturers and local codes set clearances from windows, doors, vents and property lines; the installer follows both.
Related help in Oklahoma City
Standby Generator Installation in other cities
Need standby generator installation in Oklahoma City?
Call now and we connect you with a licensed electrician who serves your ZIP code.