Nationwide · Licensed electricians in 48 states + DC
Call now to check electrician availability in your area
EV Charger Installation · Arizona
A Level 2 home charger needs a 240 volt circuit, usually 40 to 60 amps, run from your panel to the garage or driveway. The electrician checks whether your service can carry the load, pulls the permit and installs either a hardwired charger or a NEMA 14-50 outlet.
Summer heat puts air conditioners under heavy, constant load, and monsoon storms bring lightning and outages.
Across the Southwest, homes deal with extreme summer heat and monsoon storms. Permit offices, utilities and housing stock differ by city, which affects how ev charger installation is planned and scheduled. These local guides cover the Arizona cities where we have written specific notes.
Garage EV chargers in Phoenix need to be planned for heat. Garages can get very hot in summer, so equipment ratings and wire sizing matter, and chargers that reduce output when hot will charge more slowly.
Utility: APS or SRP, depending on address
Tucson's sprawl and sunny weather make electric cars and rooftop solar a natural pair, and many owners want a Level 2 charger in the garage or carport. Older homes in the central neighborhoods, including adobe and territorial houses in Armory Park and Barrio Viejo, may have small panels and no garage, so an outdoor-rated charger or a longer run may be needed.
Utility: Tucson Electric Power (TEP)
Mesa's large subdivisions such as Dobson Ranch, Las Sendas and Eastmark mostly have attached garages, which makes a Level 2 charger a straightforward project, but garages here can pass 120 degrees in summer, so a charger rated for high ambient temperatures matters. Many homes already run a large AC system and a pool pump, so a load calculation decides whether a 40 or 48 amp charger fits or a lower setting makes more sense.
Utility: SRP or City of Mesa Electric, depending on address
1. Site and load check
Panel capacity, distance and mounting location are confirmed.
2. Permit
The installation is permitted; rebates may require the permit number.
3. Install
The 240V circuit and charger or receptacle are installed and tested.
4. Inspection
The local inspector signs off.
Electricians set their own prices; local permit fees and utility requirements add to these factors.
Permits come from the city or county where the home is. For example: Phoenix: The City of Phoenix issues electrical permits through its Planning and Development Department; Scottsdale, Mesa, Tempe and other cities run their own. Tucson: Inside city limits, electrical permits come from the City of Tucson's Planning and Development Services; unincorporated areas are permitted by Pima County. Mesa: Electrical permits inside city limits come from the City of Mesa's development services.
Phoenix: APS or SRP, depending on address. Tucson: Tucson Electric Power (TEP). Mesa: SRP or City of Mesa Electric, depending on address.
Not always. A load calculation shows whether the existing service can carry the charger; load management devices can avoid an upgrade in some homes.
Hardwired is often preferred for higher amperage and outdoor locations. A plug-in charger on a NEMA 14-50 outlet is easier to replace.
Call now and we connect you with a licensed electrician who serves your ZIP code.
