Federal Pacific Panel Replacement · Greenville, SC
Federal Pacific Panel Replacement in Greenville, SC
Federal Pacific Electric (FPE) panels with Stab-Lok breakers have a long history of breakers that may fail to trip during an overload or short circuit. Electricians commonly recommend replacing them, and many insurers ask about them.
- Call now to check electrician availability in your area
- Independent, licensed electricians
- Serving North Main, Augusta Road, Overbrook and more
Why federal pacific panel replacement comes up in Greenville
Greenville's postwar neighborhoods along Augusta Road, Parkins Mill Road and in the suburbs toward Mauldin and Taylors were built when Federal Pacific panels were common, and many homes still have them. Greenville's fast-moving housing market means inspectors flag them often. Electricians replace the whole panel rather than individual Stab-Lok breakers, often moving to 200 amps for a heat pump or EV charger.
Duke Energy schedules the meter pull. Permits come from the City of Greenville's Planning and Development office or Greenville County. Ask for the meter base and grounding checked during the swap.
- Permits in Greenville
- Electrical permits inside city limits come from the City of Greenville's Planning and Development office; unincorporated areas are permitted by Greenville County. South Carolina licenses electricians through LLR.
- Electric utility
- Duke Energy
Signs to look for
- "Federal Pacific", "FPE" or "Stab-Lok" on the panel label
- Breakers that feel loose or do not snap firmly into place
- A home inspector or insurer flagging the panel
- Warm breakers or a warm panel cover
- Plans to add major loads to an older home
How the work is done
1. Confirm the panel type
The electrician identifies the panel and checks the service, meter base and grounding.
2. Permit and utility disconnect
The permit is pulled and the utility shuts off power for the swap.
3. Replace panel and breakers
All circuits move to a new panel with listed breakers and required AFCI and GFCI protection.
4. Inspection and reconnect
The work is inspected and power is restored.
What moves the price in Greenville
Electricians set their own prices. Mill-village houses are often small with limited circuits and small services, and many have been renovated in stages.
- Panel size and number of circuits
- Whether the service amperage increases
- Meter base or service entrance replacement
- Panel relocation
- Grounding and bonding corrections
- Permit and utility fees
Federal Pacific Panel Replacement in Greenville: questions
Do I need a permit for federal pacific panel replacement in Greenville?
Usually, yes. Electrical permits inside city limits come from the City of Greenville's Planning and Development office; unincorporated areas are permitted by Greenville County. South Carolina licenses electricians through LLR. The electrician normally pulls the permit and schedules the inspection.
Is the utility involved in Greenville?
If the work affects the meter or service, the electrician coordinates with Duke Energy, which owns the meter and service drop.
How do I know if I have a Federal Pacific panel?
Look for "Federal Pacific Electric", "FPE" or "Stab-Lok" on the panel door or label, and thin breakers with red-orange tips.
Can I just replace the Stab-Lok breakers?
Electricians generally recommend replacing the whole panel, because the concerns involve how the breakers and panel work together, not only individual breakers.
Will my insurance cover an FPE panel?
Some insurers decline or surcharge homes with FPE panels. Ask your insurer directly; a permit and final inspection usually document the replacement.
Is a Federal Pacific panel an emergency?
Not by itself, but signs like heat, burning smells or breakers that do not reset are reasons to call promptly.
Related help in Greenville
Federal Pacific Panel Replacement in other cities
Need federal pacific panel replacement in Greenville?
Call now and we connect you with a licensed electrician who serves your ZIP code.